Selecting Cushion/Pad
<back
A firm and resilient
carpet cushion is necessary to form a good foundation for
your carpet, increasing its comfort and extending its life,
by absorbing the impact of foot traffic. Cushion also adds
insulation and reduces noise. For most residential carpet
applications, choose cushion not more than 7/16" thick. If
the carpet is a Berber or a low profile carpet, choose a
cushion no more than 3/8" thick.
The appropriate carpet
cushion, or "pad," provides additional resilience,
acoustical, and thermal qualities, comfort underfoot, and
can extend the life of the carpet. Cushion should be
selected according to the carpet manufacturer's requirements
for thickness and density. Improper selection of carpet
cushion can accelerate loss of carpet surface appearance,
cause wrinkling and buckling, cause separation of the carpet
seams, and can cause a breakdown of the carpet structure
itself. Improper cushion selection also may void applicable
carpet manufacturer's warranties.
Carpet cushion is made
primarily from polyurethane foam, fiber, or rubber and is
available in a variety of styles and constructions to fit
your needs. The type and thickness of cushion you need
varies according to traffic levels and patterns. For
example, bedrooms, dens, lounge areas and other rooms with
light or moderate traffic can use thicker and softer
cushion, while living rooms, family rooms, hallways, stairs
and other heavy traffic areas require thinner, firmer
cushion.
- Residential cut
pile, cut and loop, or high-level loop carpet requires a
resilient, firm cushion with a thickness of 7/16 inch or
less. Types of cushion may be various polyurethane
foams, including the very common bonded foam product
often referred to as "rebond," fiber, or rubber.
- Berber carpet, or
thinner loop or cut pile carpet
Berber carpet is made with large, wide loops and it has
been found that a stable, low-flexing, cushion
foundation is necessary. A thicker, softer cushion is
not acceptable. Cushion thickness should not exceed 3/8
inch for these type products. Again, check with the
carpet manufacturer to see if a specific cushion is
required. Following are suggested cushions for use under
thinner or Berber carpet:
| 40 ounce |
rubberized jute |
| 22-28
ounce/sq.yd |
felted
synthetic fiber |
| 8 lbs/cu.ft.
|
bonded or
"rebond" polyurethane |
| 64 ounces
+ |
flat
rubber |
| 2.7 lbs/cu.ft
|
prime
polyurethane |
| 10 lbs/cu.ft.
or greater |
mechanically frothed prime polyurethane |
Attached
cushion—some carpet is made with the cushion attached.
With this carpet, a separate cushion is not necessary.
|